|
|
Post by sameagol26 on Aug 1, 2010 20:02:09 GMT -5
Hi, I have had my Invert Mini now for a few months. Not used it all that much but anyways i run a 70/4500 Pure Energy psi tank on it. I get only 500 shots at the most when i have it filled to 3000 psi which is brutal. I am wondering why this is happening. I usually run it on full auto or psp at 12 bps. Any help would be appreciated, thanks.
|
|
|
|
Post by santos on Aug 4, 2010 11:01:33 GMT -5
What is your reg set up as? does it read 200psi?
|
|
|
|
Post by sameagol26 on Aug 4, 2010 11:42:11 GMT -5
Yeah, its actually about 190, so it doesn't make sense why i get such few shots. I bought the TechT delrin bolt so i am hoping that this will improve efficiency...
|
|
|
|
Post by santos on Aug 5, 2010 11:29:26 GMT -5
Yah it might improve it abit but ask another person who has a mini and see if they r getting ruffly the same amount of shots. I dont think there is anything wrong with ur gun
|
|
|
|
Post by Corey on Aug 8, 2010 22:20:58 GMT -5
You should be able to turn the dwell down a little, which will help on air consumption...check in your manuel for dwell setting on your board...hope that helps
|
|
|
|
Post by sameagol26 on Aug 9, 2010 16:22:21 GMT -5
Alright! I may try this then, thaanks guys  |
|
|
|
Post by santos on Aug 10, 2010 16:35:08 GMT -5
You should be able to turn the dwell down a little, which will help on air consumption...check in your manuel for dwell setting on your board...hope that helps dont turn it down too much or you will mess up your gun. Check out some websites that give you recommended settings for a mini or stop by the store for some help |
|
|
|
Post by sameagol26 on Aug 13, 2010 16:23:10 GMT -5
Well I didnt buy it from Bronson and Bronson but am i still able to do so? Also Santos. i bought a T8.1 about a week ago and I was told I can bring the gun in and be shown how to dissassemble the marker? Am I correct? I bought the extra warranty thing and one of the workers at B&B said i get a free walk through on dissassembling the T8.1 so thats why im asking
|
|
khostreetsage
Junior Member
Resident Gun Whore
Fear the man not the marker
Posts: 68
|
Post by khostreetsage on Aug 13, 2010 17:21:19 GMT -5
that's all you santos
|
|
|
|
Post by santos on Aug 18, 2010 17:06:08 GMT -5
Well I didnt buy it from Bronson and Bronson but am i still able to do so? Also Santos. i bought a T8.1 about a week ago and I was told I can bring the gun in and be shown how to dissassemble the marker? Am I correct? I bought the extra warranty thing and one of the workers at B&B said i get a free walk through on dissassembling the T8.1 so thats why im asking If you didnt by the gun here we would set up an appointment with ya and just charge you accordingly like 20$ for my time. As for the T8.1 you will get it free since you have have bought the extended warrenty. |
|
