help with my proto matrix rail

[ion1990]

pmr proto turns on... no leaks but wont shoot a ball or make any sounds ....... need help so i can play again soon

Attachments:

[khostreetsage]

I don't mean this to be patronizing but it has to be asked, did you either put paint in or disable the eyes first?

[ion1990]

yes i did ive been paintballing for a while just not use to the gun

[gjbmiller]

Have you tried a fresh battery?

Some tips from the manual:

SOLENOID WILL NOT ACTIVATE / TRIGGER NOT WORKING
• Check that the trigger adjustment is not set so that the micro switch cannot
activate. You should hear a small click when pulling the trigger
• If the PMR fires once when turned on but not after that your trigger is set so
that the micro switch is always activated. Re-adjust the trigger
• If the trigger is correctly adjusted but the PMR still won’t fire check that the
micro switch cable is well inserted into the board and to the correct connector
(the micro switch connector is marked with the text “SWI” on the board)
• Change the battery if not positive about it’s charge
• Check that the solenoid cable is attached to the board and to the right
connector (solenoid should be attached to the connector that is marked with
the text “SOL”)

PMR WON’T FIRE
PMR FIRES BUT BALLS ARE DROPPING OFF OR NOT EVEN COMING
OUT OF THE BARREL
• Make sure the battery is good
• Raise the dwell to factory level (25)
• Make sure bolt is well lubed and moves well. If there is too much friction in
the bolt it will cause the PMR to shoot down
• Make sure air system is screwed in all the way

[ion1990]

thanks cuz i did loose the book but i still dont think thats gonna help. the triger sounds, eyes off on, fresh battery. no fire. when i shake the gun my reg makes a funny sound like somethings loose inside, but if it was blown it would leak and theres no leak. i dont no what to do. if i cant fix it ill just sell it or something

[gjbmiller]

Jan 11, 2011 13:25:12 GMT -5 ion1990 said:

thanks cuz i did loose the book but i still dont think thats gonna help. the triger sounds, eyes off on, fresh battery. no fire. when i shake the gun my reg makes a funny sound like somethings loose inside, but if it was blown it would leak and theres no leak. i dont no what to do. if i cant fix it ill just sell it or something

The shims inside the hyper 2 will rattle when it is shaken with no air source attached to it.

Check this thread and see if it helps: www.pbnation.com/showthread.php?t=3109627